Ferro Alloys
Ferro Alloys are produced by adding chemical elements into molten metal, usually during steel-making. Because of our prime Ferro Alloys. they impart distinctive qualities to steel and cast iron or serve important functions during production and are, therefore, closely associated with the iron and steel industry, the leading consumer of ferro alloys. We are more than THREE decades old ferro alloys production company.
Backed by more than 3 decades of experience, we, RAGHAV STEELS, are manufacturing and exporting a wide range of Other Ferro Alloys. These are various alloys of iron with a high proportion of one or more elements. Our Other Ferro Alloys are largely used in the production of steel and in extraction of manganese from its ore. Clients can get these from us in different grades and compositions to suit their requirement. We offer assured quality Other Ferro Alloys . The principle Ferro Alloys are those of chromium, manganese, and silicon. They are used in the production of steels and alloys as a raw material
Specifications:
- Ferro Boron
- Ferro Silico Zirconium
- Ferro Tungston
- Ferro Silico Manganesium: Mg-40-60%, Si-8-10%
- Manganese Metal: Purity upto 98%.
- Calcium Carbide: Grade 280-350
- Nickle Plate: 4x4 Purity 99.9%.
We are the leading manufacturer, exporter, trader and supplier of Liquid Ferro Alloys used widely in the production of steel-making. Due to our competitive prices, we are a popular name in the national as well as international market.
Ferro Vanadium
Vanadium is primarily recovered from titanium-bearing magnetite ore processed to produce pig iron. 99% of it goes into steel manufacturing.
Specifications
V-Starting from 50% to 80%, Si-1.5% max.
Al-1% max., S-0.04% max., Carbon-0.1% max.
Ferro Titanium Alloys
Major in the industry, we supply select quality of Ferro Titanium Alloys. Titanium is used in steel-making for deoxidation, grain-size control, and carbon and nitrogen control and stabilization. Steels with relatively high titanium content include interstitial-free, stainless and high-strength low-alloy steels.
Specifications
Ti starting from 22% to 75% grade, Al 4-8% max.
Si 4% max. C 0.1% max. P 0 .05% max. S-0.03% max.
Ferro Silicon Alloys
Ferro Silicon Alloy consumption is driven by cast iron and steel production, where silicon alloys are used as deoxidizers. Ferrosilicon is used in making steels and foundries as a source of silicon in the production of carbon steels, stainless steels, and the like for deoxidizing properties to prevent the loss of carbon from the molten steel. Also known as ferrosilicium, we manufacture, export, distribute, supply and trade in Ferro Silicon Alloys for the quality of steel.
Specifications
Si-70-80%, C-As low as 0.03% max.
P-0.03% max, Al-As low as 0.05% max.
Ferro Silico Calcium (Calcium Silicide)
Ferro Silico Calcium is insoluble in water, but may decompose when subjected to moisture, evolving hydrogen and producing calcium hydroxide. Decomposes in hot water. It is flammable and may ignite spontaneously in air. Calcium silicide is used for manufacture of special metal alloys, e.g. for removing phosphorus and as a deoxidizer.
Specifications
Si-55-65%, Ca-28-40%,
C- 1%, S-0.1%, P-0.03%
Ferro Phosphorous
Ferro Phosphorus, a combination of phosphorus with iron, is used as an ingredient in high-strength low-alloy steel.
Specifications
P- 23% min., C-0.15%,
S-0.05%, Si-3%.
Ferro Molybdenum
We, Raghav Steels, make sure that the cleanliness of steel largely depends upon the secondary refining processes by way of Ferro Molybdenum as it precedes the solidification of steel. These are available in different grades and market prices.
Specifications
Mo 60 - 75%, Si- Starting from 1% to 2.5% max.
P- 0.05% max., S- 0.1% max., C-0.1%Max., P- 23% min.
Ferro Manganese Alloys
Ferro Manganese Alloys is a type of ferro alloy with a high content of manganese. Made by heating mixture of MnO2 and Fe2O3 oxides with carbon in a furnace. These undergo thorough thermal decomposition reaction and are used as steel deoxidizer in our industry. They are cost effective in the manufacturing of special kinds of steels.
Specifications
Mn-60-80%, P-0.15% max, Si-1.5% max., S-0.05% max.
Carbon:
For high carbon upto 8% max.
For low carbon upto 0.03% max.
Ferro Chrome Alloys
Our Ferro Chrome Alloys go through a routine quality process where chromite ore production is smelted in electric-arc furnaces to produce ferro chromium for the metallurgical industry. This is a corrosion resistant alloy type of chrome provided especially but the quality leaders, Raghav Steels.
Specifications
Cr-60-70%, P-0.03% max, Si-2% as well as 4%max., S-0.05% max.
Carbon:
For high carbon upto 8% max.
For low carbon upto 0.03% max.
Ferro Aluminium
Supreme quality Ferro Aluminium manufactured, exported, supplied, and traded by Raghav Steels makes sure there is no inadvertent entry of deleterious impurities (e.g. non-metallic inclusions) in to the liquid steel.
Specifications
Ferro Aluminium: Al-30-60%
Aluminium Ingot: Purity upto 99.9%
Aluminium Notch Bar: Purity upto 99.9%
Aluminium Powder: Purity upto 99.9%
Silico Manganese Alloys
Silico Manganese is a ferro alloy with high manganese and silicon content. Made by heating a mixture of oxides namely manganese oxide, silicon dioxide, and iron oxide with carbon in a furnace, silico manganese undergoes a routine thermal decomposition reaction for specific quality parameters. Like others, it is also used as a deoxidizer and an alloying element in steel.
Specifications
Mn-50-80%, P-0.1% max, Si-Starting from 11% to 28%, S-0.05% max.
Carbon:
For high carbon upto 2% max.
For low carbon upto 0.05% max.
